2017 Honda Power Equipment WSP33

/

  • 1/3 hp 115V submersible pump
  • Top discharge
  • 40 gal./min capacity
  • Lightweight durable stainless steel casing
  • Automatic non-mercury float switch
  • Rated for continuous use

Features

  • 1/3HP, 115V SUBMERSIBLE PUMP: 115 Volt operation allows the pump to be plugged into a standard outlet. (GFCI is recommended).
  • IDEAL FOR DRAINING BASEMENTS, WINDOW WELLS, GARDEN IRRIGATION, DECORATIVE FOUNTAINS AND MORE
  • 40 GAL. /MIN CAPACITY
  • RATED FOR CONTINUOUS USE: Operates on continuous duty in temperatures of up to 104°, and intermittent duty up to 140°. Since this pump can be used 7 days a week, 24 hours a day, it is suitable for any application that needs to move water from one place to another on a continuous basis.
  • SOLIDS HANDLING UP TO 3/8 IN.: Move slurry and dirty liquids without the worry of damaging the pump.
  • LIGHTWEIGHT DURABLE STAINLESS STEEL CASING: The pump won’t rust or corrode, minimizing costly repairs and replacement. The 304 stainless steel is an industrial grade, again minimizing damage and reducing the need for repairs.
  • AUTOMATIC NON-MERCURY FLOAT SWITCH: Honda submersible pumps use a mechanical float switch instead of mercury, eliminating the use of hazardous materials in the pump.
  • BUILT IN THERMAL RESET SWITCH: If the pump overheats, it automatically resets itself after the pump cools down. This is designed to protect the motor from periodic overheating.
  • 20 FOOT HEAVY DUTY CORD
  • TOP DISCHARGE: Great for applications where space is tight.
  • OPERATES FULLY OR PARTIALLY SUBMERGED: No need to worry about the water level for the pump!
  • SHIELDED BALL BEARINGS FOR ADDED DURABILITY: Shielded ball bearings, both top and bottom, add significantly to the longevity of the pump.
  • EFFICIENT AIR-INSULATED MOTOR
  • OIL LUBRICATED DOUBLE MECHANICAL SEALS: Oil lubricated double mechanical seals prevent damage to the seal if the pump is run dry.

General Information

Manufacturer Honda Power Equipment
Model Year 2017
Model WSP33
Model Code WSP33
Color Silver

Body

Housing

Casing - Stainless steel

Impeller - Thermo plastic Noryl

Seals - Single carbon / ceramic lower mechanical seal, rubber single lip upper seal

Dimensions

Height 10.3 in.
Width 6.4 in.
Diameter 6.4 in.
Weight Dry - 11 lb.

Electrical

Voltage 115
Amps

Starting - 10

Running - 4

Engine

Horsepower 1/3 hp
Starter Automatic

Operational

Operating Pressure 10 psi max.
Discharge

Type - Top

Capacity - 40 gpm

Port Diameter - 1.25 in. FNPT

Solids Handling 0.375 in.
Cord Length 20 ft.

Other

Miscellaneous

Type - Submersible standard

Duty - Continuous

Head - 23 ft. max.

Warranty

Residential - 1 year

Commercial - 1 year